![]() Adjust the listening volume on the headset or on the mobile phone.ġ0-3. The link to the headset will be brought up automatically.ġ0-2. While wearing your headset, place a call with your mobile phone. Your Savi base is now paired with your Bluetooth mobile phone.ġ0-1. The Bluetooth indicator light on the base will turn solid blue. If prompted by your mobile phone, type “0000” as the passcode.ĩ-4. “SAVI” will appear on the phone when the phone finds the base.ĩ-3. Place the Bluetooth mobile phone into discover mode. The Bluetooth indicator light will alternately flash red and blue.ĩ-2. Press and hold the Bluetooth pairing button on the Savi base for three seconds. Pairing Savi Base to Bluetooth Mobile Phoneĩ-1.See /healthandsafety for more information on headsets and hearing. Caution: Do not use headphones / headsets at high volumes for an extended period of time. Press the call control button on the headset and return the handset to the cradle to complete the test call. If the speaking volume is too loud or too soft for your listener, adjust the desk phone speaking volume on the base.Ĩ-8. If the listening volume is still too loud or too soft, adjust the desk phone listening volume on the base.Ĩ-7. The desk phone talk button on the base will turn solid red when the headset is muted.Ĩ-6. To mute/unmute the call, press the volume button in. The opposite is true when wearing on left ear.Ĩ-5. When wearing the headset on your right ear, push the volume button up to increase the volume and push the volume button down to decrease the volume. You can fine tune the listening volume on the headset. Dial the number using your desk phone.Ĩ-4. Remove the handset from desk phone cradle.Ĩ-3. While wearing your headset, press the call control button on headset.Ĩ-2. Press the call control button on the headset and return the handset to the cradle to complete configuration. NOTE : Multiple settings might work with your phone however, only one is the optimal position.ħ-8. If the dial tone still does not sound clear, adjust the configuration switch until the dial tone sounds the best. If the dial tone is too loud or too soft, adjust the headset volume level.ħ-7. If the dial tone sounds clear, press the call control button on headset and continue with Step 8 Making a Test Call with Desk Phone.ħ-6. ![]() Remove the handset from desk phone cradle.ħ-5. While wearing your headset, press the call control button on headset.ħ-4. note For most phones, these factory default settings will sound the best.ħ-3. On the base, ensure the configuration switch is set to “A” and the desk phone speaking volume and desk phone listening volume are both set to 3. Set volume on desk phone to mid-range.ħ-2. Charge for at least 20 minutes prior to the first use. The charging indicator light on the base will flash green to indicate that the headset battery is charging.Ħ-2. Gently push the headset into the charge cradle. ![]() 5-2 If you prefer the over-the-head style, attach the headband to the headset.Ħ-1. NOTE : Ensure the large end of the eartip faces down towards the microphone. If you prefer the over-the-ear style, attach the earloop first and then the eartip to the headset. Use only the battery type supplied by Plantronics.ĥ-1. NOTE : This product has a replaceable battery. Position the battery as shown on headset and slide into position until the battery snaps into place. ![]() Connect the base power supply into the power jack on the base.Ĥ-1. Connect the handset coil cord to the telephone interface cable junction box. After disconnecting the handset coil cord from the desk phone, connect the telephone interface cable to the now open handset port on the desk phone.Ģ-3. Connect the telephone interface cable to the telephone interface cable jack on the base.Ģ-2. Push firmly on the cradle until the cradle snaps into place.Ģ-1.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |